Stock Automotive Nameplates
Stock Design 3-D Nameplates are high quality and low cost. Choose between six
different styles. There are no art charges for Stock Design 3-D Nameplates, and we
guarantee a quick turnaround.
- Simple, straight design.
- Variety of font options.
- All of our automotive signs are manufactured to withstand car
washes, road salts, and sunlight.
Available Plastic Colors.
Available Print Colors.
Item #: 04-76, 04-79, 04-80, 04-90
Material: Hard High Impact Polystyrene plastic.
Size: Up to 1-3/4" x 6-1/2" not to exceed 12 square inches.
Prices Include: Black plastic, one raised print color, and one adhesive strip* up to 3/4" wide, or as many countersunk holes as needed.
Attachments: Double coated exterior grade foam adhesive strip up to 3/4" wide, applied to back (item # ending in A), or as many countersunk holes (item # ending in H) as needed. To assure a proper bond, the adhesive tape must be applied to clean, dry, wax-free surface at an ambient temperature between 65 F & 99 F.
It is important the adhesive has sufficient amount of pressure applied, evenly from corner to corner, to insure the foam carrier fills all voids in the substrate.
After the tape is properly applied allow up to 72 hours for the adhesive to become fully bonded to the
substrate. Screws are not provided with nameplates.
*Nameplates that require more than one adhesive strip add $0.12 to unit cost (V).
|Item #||Attachment Options||Setup Starts At||125||250||500||1000||2500|
|04-xxH||Holes or no Adhesive||$95.00||2.07||1.44||1.16||.87||.83|
|411A||Woodgrain panels with strip adhesive||$75.00||2.89||1.99||1.53||1.24||1.16|
|411H||Woodgrain panels with holes or no adhesive||$75.00||2.46||1.69||1.29||1.06||.99|
|Extra print color||Base price is for one print color on black plastic, add for each extra raised color.||$35.00||0.39||0.34||0.29||0.22||0.20|
Items 04-xxA, 04-xxH, 411A and 411H are (V5R) Extra print colors are (V)
Setup charge(s) on first order only unless changes are made.
Contact factory for quantities not shown .