Molded Black Plastic with Die Cut Adhesive Nameplates
Die Cut Adhesive (DCA) Nameplates are an extra step toward excellence for discriminating auto dealers. They give any dealership an O.E.M. (Original Equipment Manufacturer) appearance, making the nameplate look like it is part of the vehicle. DCAs are also a superior choice for van conversion companies, limited edition vehicles, and organizations that want special distinction for their members.
- Entire backside covered with exterior grade foam adhesive.
- Manufactured to withstand car washes, road salts, and sunlight
Available Plastic Colors.
Available Print Colors.
Print Colors: For print surface longevity, we recommend chrome rather than bright silver.
|Minimum letter height||5/8"|
|Minimum line stroke||1/4"|
|Minimum hole opening*
*As in the center of the letter "A"
Attachment: Double coated exterior grade foam adhesive is cut to approximate the shape of the part and is applied to back. To assure a proper bond, the adhesive tape must be applied to clean, dry, wax-free surface at an ambient temperature between 65 F & 99 F.
It is important the adhesive has sufficient amount of pressure applied, evenly from corner to corner, to insure the foam carrier fills all voids in the substrate.
After the tape is properly applied allow up to 72 hours for the adhesive to become fully bonded to the
Price Includes: Black plastic, one raised print color, and die-cut adhesive tape.
|Item #||Size||Setup Starts At||125||250||500||1000||2500|
|DCA9||Up to 9.9 Square Inches||$95.00||$4.34||$2.89||$2.43||$2.19||$2.14|
|Extra print color||Base price is for one print color on black plastic, add for each extra raised color.||$35.00||0.39||0.34||0.29||0.22||0.20|
Item DCA9 are (V5R) Extra print colors is (V)
Setup charge(s) on first order only unless changes are made.
Contact factory for quantities not shown.
Exterior grade foam adhesive is die cut to give a seamless OEM finish.